Hyundai/Kia Vehicle to Load V2L Discharge Cable

A Simple Adapter Power Source (Hyundai/Kia Only)

Turn your Hyundai Ioniq 5 and Kia EV6 into a mobile power source for home appliances

Simply plug into your Type 2 charge port and use the push button on the Type 2 connector to toggle the V2L function on and off.

Connect up to 3kW (UK 3 pin) or 3.6kW (CEE and Schuko) of load (Depending on car model)

Power camping equipment in the wilderness!

Vehicle to load cables should not be connected to any other electrical system as there is no voltage or phase synchronisation. Failing to adhere to this will void your vehicle warranty and has the potential to cause serious damage to both the connected system and your vehicle

• * What is IP44 Rating?

• The IP44 (Ingress Protection Rating) means our cables will operate in dusty conditions, and will resist splashes of water while mated. However, the charging process is not fully water sealed and the cables should not be submerged in water or operated in the rain.

  Cable Information

  16A 3G2.5mm2+2*0.5mm2 EV Wire (AC) / 15mm Diameter

  Charging Cable Safety

  • The cable should be kept out of puddles but can be kept outside.
  • Please remember to use the rubber cover to keep moisture from the connector when not in use. The vehicle will not charge if it senses moisture.
  • Moisture is the most common issue experienced and will lead to corrosion of the pins which are not covered by our warranty.

  Why can't we charge in the rain?

  Water can still get into the plug and charging socket during the inserting and removing of the plug from the car. In fact, as soon as you open the charge port or unplug your car, the rain will get onto the pins and stay there until the next time you charge.